Ricoh Taurus-C1a Technical Bulletin page 363

Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
10. Connect cable [B] (disconnected in step 8) to the connector on the far left of D0746371 (circled
in green). Connect the connector routing from D0746371 to the connector where cable [B] was
originally connected to (circled in pink).
*The harness is routed through the hooks on the plastic case.
12. Set the harness.
13. Reassemble the ITB unit by following the above steps up to Step 2 in reverse order.
echnical
T B
ulletin
Date:
08-Jan-13
PAGE: 7/20
No.: RD074097c