Table of Contents
Advertisement
Reissued:30-Jan-14
Model:
Taurus C1/P1 (D074/D075/M044)
12. Open the front door again and execute SP2920-001 (Steering Control Roller: Initialize
Belt Position).
Note: Keep the ITB cleaning blades retracted to run this SP.
13. After pressing the "Execute" button, close the front door to run the above SP.
14. When you see "Completed" displayed on the operation panel. You are ready to continue
15. Re-install the PTR unit.
16. Rotate both levers of the ITB cleaning unit counter-clockwise and re-install the front cover.
17. Close the front doors.
18. Do SP2912-001.
19. Do SP2914-001.
20.
Execute SP3011-004 (MUSIC)
21.
Exit the SP mode.
Reason:
Machine power needs to be turned off and on in order for the SP values to take effect. Skipping
this step will cause color misalignment and unsuccessful initialization of the ITB feedback sensors.
echnical
T
Then cycle the machine off and on.
Then cycle the machine off and on.
ulletin
B
Date:
06-Feb-13
PAGE: 2/2
No.:
RD074100a
Advertisement
Chapters
Table of Contents
