Table of Contents
Advertisement
Model:
Taurus-C1/P1 (D074/D075/M044)
2. Image Position Adjustment
This procedure aims to position the images on the front (1
printing to the center of the paper. Adjustments are available for paper of all different
weights.
Blue dots indicate the image position on the front (1
nd
(2
) side.
1. Set A3 or DLT plain paper (63.1-80.0 gsm) on Tray 2 and apply this to the tray paper
setting.
2. Input the following default values for these SPs.
NOTE: If the values currently applied are not default and need to be changed, make sure to reset them
to the original value after completing this procedure.
SP2103-001 (Erase Margin Adj: LE Width)
SP2103-003 (Erase Margin Adj: Left)
SP2122-102 (Erase Margin Adj: LE Plain Weight 2)
3. Print 5 copies of the test pattern Trimming Area (SP2109-003-14) in b/w, simplex.
4. Measure the distance (a) on all 5 copies and calculate the average.
5. Do the following calculation: 2.0 – (average (a)) = X
T
B
echnical
ulletin
Date:
10-Apr-12
st
) and back (2
st
) side, and red indicates the back
4.0 mm
2.0 mm
0.0 mm
PAGE: 8/16
No.:
RD074060
nd
) sides in duplex
Advertisement
Chapters
Table of Contents
