Model:
Taurus-C1/P1 (D074/D075/M044)
Detail
A spring plate is attached to the black plastic plate to conduct electrical bias from the heat
sink to the development roller.
Removing this black plastic plate could bend the spring plate and disable proper contact
between the spring plate and the heat sink, resulting in the sharp bands at 50mm intervals
like the picture on P.1.
Front view of the PCDU,
with its cover removed
Black plastic plate
Black plastic plate
Black plastic plate
Black plastic plate
Bent
Normal
T
echnical
Spring-plate
Spring plate
D-
F ront frame
Frame
This photo shows an example of a bent spring pate.
B
ulletin
Date:
18-Jul-12
This D-cut hole connects to
the development roller.
PAGE: 2/2
No.:
RD074080