Ricoh Taurus-C1a Technical Bulletin page 164

Model:
Taurus-C1a/C1b
Subject:
Procedure for Installing the Optional Key Card
Interface Kit.
From: 1
st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
This RTB has been issued to announce the procedure for attaching the external key card.
Note
Taurus supports the external key card but not the external key counter.
Procedure
1. Procure a Ricoh manufactured relay board.
"B87011(EDP 413012)：OPTIONAL COUNTER I/F TYPE A"
2. Turn the main switch off.
3. Remove the controller box cover by following the procedure in your Taurus service
manual in the section:
4. Replacement and Adjustments > Common Procedures > Removing Doors, Covers >
Controller Box Covers
4. Install the board on the controller box (screws x4)
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
27-Feb-12
Prepared by: S. Sasaki
Part information
Electrical
Transmit/receive
Other ( )
[A]
PAGE: 1/5
No.:
RD074046
Action required
Service manual revision
Retrofit information
Tier2