Ricoh Taurus-C1a Technical Bulletin page 73

Model:
Taurus-C1 / P1
< Laser Unit \ YM Laser Unit Removal: D074/D075 >
Procedure for removing the Plates was changed accordingly with the change made in the
method for fixing the plates.
Before the Revision
1. Remove:
[A] Ground plate ( x2)
[B] ARDF base plate ( x4)
[A] Ground plate ( x2)
[B] ARDF base plate ( x4)
< Laser Unit \ YM Laser Unit Removal: M044 >
Procedure for M044 was added.
< Toner Supply Unit Removal \ Toner Supply Unit Removal >
Procedure for M044 was added.
<Photoconductor Development Unit (PCDU) \ PCDU Replacement >
"CAUTION" note for setting PCDU was added.
• To prevent toner scatter or gear damage, never apply excessive force on the PCDU when you push
it into the machine.
3. After you push the PCDU into the machine, make sure that PCDU is locked correctly.
T B
echnical
12. Remove:
[A] ARDF base plate ( x4)
[B] ARDF base plate ( x4)
[C] Shield plate ( x4)
ulletin
Date:
21-Oct-11
After the Revision
PAGE: 25/58
No.:
RD074026