Ricoh Taurus-C1a Technical Bulletin page 304

Model:
Taurus-C1a/C1b (D074/D075)
SMC
Factory set TD Sensor values can be found in SMCs that had been output from
machines prior to exhibiting the symptom: SC36x.
Contact RCL via your supervisor.
RCL can provide you the factory set TD Sensor default values for development units
that are installed in the mainframe at the factory. This means that if the affected
development unit has already been replaced, the factory set default values will not be
available.
If the factory set default value cannot be obtained, the development unit will have to be
replaced.
3. Press # to adjust the next SP value.
T B
echnical ulletin
Date:
12-Jul-12
PAGE: 7/9
No.:
RD074079