Ricoh Taurus-C1a Technical Bulletin page 92

Hide thumbs Also See for Taurus-C1a:
Table of Contents

Advertisement

Model:
Taurus-C1 / P1
< Troubleshooting for Image Quality Problems \ Color Loss \ White Spots >
The description "Before Action" was deleted.
< Troubleshooting for Image Quality Problems \ Density Problems \ Uneven Density
from Top to Bottom >
Before the Revision
Solution:
2. In the [Adjustment Settings for Skilled Operators]
menu, select [0205: Adjust Density Difference
Across Feed Direction].
Increasing the value for the affected color makes
the area above the centre denser and that below
fainter.
Decreasing the value for the affected color makes
the area above the centre fainter and that below
denser.
<Troubleshooting for Image Quality Problems \ Density Problems \ Fainter Leading
Edge>
The description "Before Action" was deleted.
Before the Revision
Important
• This solution only works when the thickness of the
paper is equivalent to Paper Weight 4 or above.
Do not try this as a solution when using paper
with a thickness equivalent to Paper Weight 3 or
below, as it may cause paper misfeeding.
< Troubleshooting for Image Quality Problems \ Density Problems \ Fainter Trailing
Edge >
The description "Before Action" was deleted.
T
B
echnical
No Replace the drum unit. ( p.553)
Solution:
2. In the [Adjustment Settings for Skilled Operators]
Decreasing the value for the affected color makes
the area above the centre denser and the area
below fainter.
Increasing the value for the affected color makes
the area above the centre fainter and the area
below denser.
Important
• This solution only works when the thickness of the
• If the leading edge coefficient is set too high, this
ulletin
Date:
21-Oct-11
to [Special Mode] or set SP2-225-12 to 15 to "1:
ON".
After the Revision
menu, select [0205: Adjust Density Difference
Across Feed Direction] or use SP2-113-001 to
004.
After the Revision
paper is equivalent to Paper Weight 4 or above.
could cause paper separation after image
transfer to deteriorate and lead to paper jams.
This is particularly true with thickness settings of
3 or lower.
PAGE: 44/58
No.:
RD074026

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Taurus-c1b

Table of Contents