Ricoh Taurus-C1a Technical Bulletin page 220

Model:
Taurus-C1/P1 (D074/D075/M044)
Subject:
Complete Registration Procedure (Skew/ Image
Position/ Front and Back Correction)
From:
PP Service Planning Department 1G
Classification:
This RTB covers all the procedures involving registration adjustments – skew, image
position and front-back magnification correction*. Note that these procedures should be
followed BEFORE making registration adjustments on the Fiery controller.
* Front-back magnification correction is the function in the IMSS (Custom Paper - Advanced Settings).
Contents
Skew Correction
1.
1-1. Perpendicularity adjustment
1-2. Achieving the recommended skew range
1-3. Possible problems involving skew correction
Image Position Adjustment
2.
Front Back Magnification Correction (IMSS)
3.
NOTE;
Use high quality paper to get accurate results – factory cut, good storage conditions.
Use a magnifier and a scale to get accurate measurements.
Factors that affect the result of the adjustments such as paper type, paper brand,
machine settings, operational environment, etc are most noticeable on 'plain/thin'
paper.
Make sure to apply the following firmware version or newer.
Copier (D074/D075)
Printer (M044)
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
Engine
1.58.04
1.58.04
B
ulletin
Date:
10-Apr-12
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
System
1.07
1.03
PAGE: 1/16
No.:
RD074060
T. Komori
Action required
Service manual revision
Retrofit information
Tier 2
Web Support
1.06
1.04