Table of Contents
Advertisement
Model:
Taurus-C1 / P1
in the paper tray.
Load identical sheets in the paper tray.
When printing from a tray containing sheets of mixed
color, you can prevent paper misfeeding by
specifying the following settings:
1. In the [Adjustment Settings for Skilled Operators]
menu, set [0107: Deactivate Image Position
Adjustment Across Feed Dir] to [On] or set the
setting of SP1-917-
2. Set [0108: Skew Detection] or SP1-021-001- to -
007 to [Off].
The skew detection level is too high.
The skew detection level may be too high.
1. Decrease the skew detection level.
In the [Adjustment Settings for Skilled Operators]
menu, increase the value in [0109: Skew
Detection Level] or increase the setting of SP1-
116-001 to -007 to the maximum value.
Increase the value to reduce the detection level.
If the problem persists even though the setting has
reached its maximum value, contact your
supervisor.
2. Set [0108: Skew Detection] to [Off] or set SP1-
021-001 to -007 to [Off].
3. Print the image. Is the problem resolved?
Yes Finished!
No Adjust the registration gate position. ( p.147
"Image Skew Check")
< Troubleshooting for Paper Delivery Problems\ Wrong Detection Skew >
Before the Revision
Disable skew detection function.
1. In the [Adjustment Settings for Skilled Operators]
menu, set [0108: Skew Detection] to [Off] or set
the setting of SP1-021-001 to -007 to [Off].
T
B
echnical
in the paper tray.
Load identical sheets in the paper tray. When
printing from a tray containing sheets of mixed color,
you can prevent paper mis-feeding by specifying the
following settings.
<If custom paper is used>
1. In [Advanced Settings] for the custom paper in
use, set [12: Deactivate Image Position Adjustment
Across Feed Dir] to [On] or set the setting of SP1-
957 to [1].
2. In [Advanced Settings] for the custom paper in
use, set [05: Skew Detection] to [Off] or set SP1-
955 to [0].
<If custom paper is not used>
1. In the [Adjustment Settings for Skilled Operators]
menu, set [0107: Deactivate Image Position
Adjustment Across Feed Dir] to [On] or set the
setting of SP1-917-001 to -007 to [1].
2. Set [0108: Skew Detection] to [Off] or SP1-021-
001- to -007 to [0].
The skew detection level is too high.
The skew detection level may be too high.
<If custom paper is used>
1. In [Advanced Settings] for the custom paper in
<If custom paper is not used>
1. Set [0108: Skew Detection] to [Off] or SP1-021-
<If custom paper is used>
1. In [Advanced Settings] for the custom paper in
ulletin
Date:
21-Oct-11
use, set [05: Skew Detection] to [Off] or set SP1-
955 to [0].
001- to -007 to [0].
After the Revision
use, set [05: Skew Detection| to [Off] or set SP1-
995 to [0].
PAGE: 49/58
No.:
RD074026
Advertisement
Chapters
Table of Contents
