Ricoh Taurus-C1a Technical Bulletin page 376

Reissued:18-Feb-13
Model:
Taurus-C1/P1 (D074/D075/M044)
Textured paper: Back of paper soiled
Cause:
Cleaning of the paper transfer roller failed when the profile of a textured paper (paper displayed as [Txt
Textured***-*** gsm ***] in the paper library) had been registered as a custom paper, causing the back of the
paper to become soiled.
This is likely to occur if:
The temperature or humidity is low.
•
Thick paper is used.
•
Solution:
Adjust the interval between the feeding of each sheet.
1. Change the value of "53: Paper Feed Interval Setting" from "100" to "80".
2. Print the image.
3. Is the problem resolved?
Yes Finish
No Contact your service representative.
Textured paper: The trailing edge of the paper is soiled every 20 mm
Cause:
If the profile of a textured paper (paper displayed as [Txt Textured***-*** gsm ***] in the paper library) has
been registered as a custom paper, the separation voltage for paper transfer is off. This may cause the
trailing edge of the paper to curl upward after being delivered through the paper transfer roller and become
soiled by toner adhered to the rib under the case of the cleaning unit for the intermediate transfer belt.
This is likely to occur if:
The temperature or humidity is low.
•
Solution:
Adjust the separation voltage for paper transfer.
Specify the following settings according to the thickness of the paper being used.
Settings
48: Txt Ppr: Ppr Trns Isolatn Voltag: Side 1
49: Txt Ppr: Ppr Trns Isolatn Voltag: Side 2
Note:
Enabling the separation voltage for paper transfer settings may cause vertical white streaks to appear.
1. Adjust the separation voltage according to the thickness of the paper being used.
2. Print the image.
3. Is the problem resolved?
Yes Finish
No Contact your service representative.
echnical
T B
ulletin
Date:
08-Jan-13
Paper Weight 3
10.4
10.4
PAGE: 20/20
No.: RD074097c
Paper Weight 4-7
9
9