Ricoh Taurus-C1a Technical Bulletin page 259

Reissued:20-Jun-12
Model:
Taurus-C1/P1 (D074/D075/M044)
13. Hold the components as shown in the photo, and remove the gears and the shaft
together from the black case.
14. Take grease from the gear installed in the old shaft assembly and apply it to the gear
installed in the new shaft assembly.
15. Insert the new shaft assembly into the black case.
echnical
T B
ulletin
Date:
16-May-12
NOTE: If the gear has absorbed
the grease and the
amount of grease is
insufficient for reuse on
the new gear, procure
the grease registered
with the service p/n
VSSG9001.
PAGE: 7/8
No.:
RD074068a