Table of Contents
Advertisement
Model:
Taurus C1/P1 (D074/D075/M044)
Subject:
TCRU/ORU user manual correction
From:
st
1
PP Tech Service Sec., PP Tech Service Dept.
Classification:
Please revise the following description in the "Adjustment Item Menu Guide for
TCRU/ORU" in the following section:
2. Details of Menu Items in Adjustment Settings for Skilled Operators > 2.2 Settings Values
> 2.2.2 Image Quality Adjustment > ◆0202: Image Density Adjustment Execute Interval
Change the default value from "0" to "500".
Background info
A part of Process Control was modified to enhance image quality in the upgraded firmware
that was released in fall 2011. The above default value was changed from "0" to "500" to
allow the modified Process Control to take effect. (The modified Process Control is
disabled when this value is set to "0".)
echnical
T
Troubleshooting
Mechanical
Paper path
Product Safety
ulletin
B
Date:
13-Dec-2012
Prepared by:
Part information
Electrical
Transmit/receive
TCRU/ORU
Other (
operation manual
)
500
500
PAGE: 1/1
No.:
RD074096
K. Tsutsui
Action required
Service manual revision
Retrofit information
Tier2
Advertisement
Chapters
Table of Contents
