Ricoh Taurus-C1a Technical Bulletin page 291

Reissued:04-Jul-12
Model:
Taurus-C1/P1 (D074/D075/M044)
Troubleshooting Shock-jitter of Cause 2
Apply the following Engine firmware versions.
Copier: Version 1.60:04 (D0745404G) or newer
Printer: Version 1.60:04 (M0445404E) or newer
Applying the above firmware versions will modify the default value of SP1022-002
from -70 to -120. This will shorten the PTR release timing interval and reduce the
chances of shock jitter.
If the firmware cannot be upgraded to the above versions for any reason, manually change
the default value of SP1022-002 (Fine Adj LEdge: Thick2) -70
Side Effect:
Image density at the trailing edge could become lower as a side effect. Retrieve
the original value to counteract the side effect. Refer to RTB no. RD074064 for
details.
T B
echnical ulletin
Date:
24-Oct-11
-120.
PAGE: 5/11
No.:
RD074029d