0202 [Adjust Image Density]; 0203 [Image Density Adjustment Execute Interval]; 0204 [Maximum Image Density] - Ricoh Pro 8300S Operating Instructions Manual

0202 [Adjust Image Density]

Execute image density control manually.
The machine adjusts the image density. This operation takes about 30 seconds during which a message
appears on the control panel. Do not pull out the drawer while the message is being displayed.
If the density does not change after applying this function several times, contact your sales or service
representative.
Setting Items
[Adjust Image Density]
• The machine executes automatic image density adjustment after a set interval or after printing a
specified number of sheets. However, you can also manually initiate automatic image density
adjustment whenever you want.

0203 [Image Density Adjustment Execute Interval]

Set the image density adjustment interval.
After printing the specified number of sheets, the machine automatically adjusts image density.
If you set this to "0", image density adjustment will not be executed automatically.
Setting Items
[No. of Sheets per Interval]
• If you need to adjust the image density manually for machine maintenance, execute 0202 [Adjust
Image Density].

0204 [Maximum Image Density]

Adjust max. image density. After the setting change, the image density is adjusted automatically before
print start.
Press [ ] or [ ] to adjust the toner adhesion.
Press [Execute].
Default Max.
Value Value
4000 5000
[Main Unit: Image Quality]
Remarks
Min.
Step
Value
0 1 Sheet(s)
Unit
31