Ricoh Taurus-C1a Technical Bulletin page 550

Model:
Taurus-c1a/C1b
2. Remove the CIS. (screw X 2)
3. Remove the paper dust on the surface of the CIS with a dry cloth.
4. Check whether the CIS is cloudy or not. See the attached photo in the "Cause" section for an
example of a cloudy CIS.
5. Insert a sheet of paper as shown by the arrow in blue in the following photo.
NOTE:
 Make sure that the paper covers the space for CIS attachment.
 The paper needs to be plain white paper. The following paper brand is recommended for this
step.
 Hammermill Fore MP White (20lb) LT, Data Copy Everyday Printing (80g/m
6. After attaching the CIS and paper dust cover with the paper inserted, turn the machine on.
NOTE: Jam001 is displayed after turning the machine on. Continue with the following steps.
7. Execute SP1-912-001 (CIS Power Adjustment).
8. Check that the value of SP1-913-001 is in the range between 13h and 57h.
NOTE: When the value is not within this range, replace the CIS because the CIS itself is broken.
9. Exit from SP mode and remove the inserted paper.
echnical
T B
This area should be covered by
paper.
ulletin
Date:
7-Sep-15
PAGE: 2/2
No.:
RD074132
2 ) A4