Ricoh Taurus-C1a Technical Bulletin page 326

Model:
Taurus-C1a/C1b (D074/D075)
Subject:
Procedure for Replacing the Entrance Seal of the
Development Unit
From:
1st Tech Service Sect., PP Tech Service Dept.
Classification:
Please add the following procedure for replacing the Entrance Seal of the development unit to your
Taurus field service manual.
The Entrance Seal comes with a bracket and is registered with the following p/n:
D0743330 ENTRANCE SEAL: DEVELOPMENT: ASS'Y
Procedure
1. Remove the development unit from the mainframe according to the procedure in the Taurus
service manual in the section:
4. Replacement and Adjustments > Common Procedures > Removing PCDUs
2. Remove the three screws.
3. Replace the assembly unit [A] consisting of the seal and the bracket.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
26-Jul-12
Prepared by:
Part information
Electrical
Transmit/receive
Other ( )
PAGE: 1/1
No.:
RD074082
Shinnosuke Sasaki
Action required
Service manual revision
Retrofit information
Tier 2
[A]