Maintenance Schedule; Specification Of Maintenance Intervals - ABB IRB 4400/60 Product Manual

3.3 Maintenance schedule

3.3.1 Specification of maintenance intervals

Introduction
The intervals are specified in different ways depending on the type of maintenance
activity to be carried out and the working conditions of the IRB 4400:
Product manual - IRB 4400
3HAC022032-001 Revision: Q
• Calendar time: specified in months regardless of whether the system is
running or not.
• Operating time: specified in operating hours. More frequent running means
more frequent maintenance activities.
• SIS: specified by the robot's SIS (Service Information System). A typical
value is given for a typical work cycle, but the value will differ depending on
how hard each part is run. The SIS used in M2000 and M2000A is further
described in the section
The SIS used in M2004 is further described in the Operating manual - Service
Information System.
© Copyright 2004-2018 ABB. All rights reserved.
3.3.1 Specification of maintenance intervals
Service Information System, M2000 on page
3 Maintenance
127.
97