3
4
5
6
7
Product manual - IRB 4400
3HAC022032-001 Revision: Q
4.2.3 Cut the paint or surface on the robot before replacing parts
Action
Seal all refitted joints with Sikaflex 521FC.
Use the tooling pin to even out the surface
of the Sikaflex seal.
Wait 15 minutes.
Use Touch up paint Foundry Prime, grey to
paint the joint.
Note
Always read the instruction in the product
data sheet in the paint repair kit for Foundry
Prime.
Apply Mercasol on all screw heads and set
screws after tightening.
© Copyright 2004-2018 ABB. All rights reserved.
Description
xx0900000122
xx0900000125
Sikaflex 521FC skin dry time (15 minutes).
3HAC035355-001
4 Repair
Continued
141