Maintenance; Maintenance Schedule For The Omnicore Controller - ABB OmniCore V400XT Product Manual

4 Maintenance

4.1 Maintenance schedule for the OmniCore controller

General
The controller must be maintained at regular intervals to ensure its function. The
activities and intervals are described in this section.
Activities and intervals
Equipment
Complete controller
Air filter
Air filter
System fans
Control cabinet
FlexPendant
Emergency stop
(FlexPendant)
Manual, auto and
manual full speed
mode with FlexPend-
ant
Enabling device
Auto stop (tested if
used)
General stop (tested
if used)
External emergency
stop (tested if used)
ESTOP_STATUS
output (tested if
used)
Reduced speed
control
i
Function test after replacement of component
After replacing a component in the controller, the function tests should be
performed. See
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Maintenance
activity
Inspection
Cleaning
Replacement
Inspection
Cleaning
Cleaning
Function test
Function test
Function test
Function test
Function test
Function test
Function test
Function test
The interval depends on the working environment of the equipment: a cleaner environment may
extend the maintenance interval and vice versa.
Function tests on page
© Copyright 2022-2023 ABB. All rights reserved.
4.1 Maintenance schedule for the OmniCore controller
Interval
i
12 months
24 months
i
6 months
When needed
12 months
12 months
12 months
12 months
12 months
12 months
12 months
During commis-
sioning
171.
4 Maintenance
Detailed in section:
Inspecting the OmniCore V400XT
controller on page 160
Cleaning air filter on page 161
Replacement of air filter on page 167
Inspecting the OmniCore V400XT
controller on page 160
Cleaning of the controller cabinet
on page 164
Cleaning the FlexPendant on
page 165
Function test of emergency stop on
page 171
Function test of manual, auto, and
manual full speed mode with Flex-
Pendant on page 172
Function test of three-position en-
abling device on page 173
Function test of Automatic Stop on
page 175
Function test of General Stop on
page 176
Function test of external emergency
stop on page 177
Function test of ESTOP_STATUS
output on page 178
Function test of reduced speed
control on page 179.
159