ABB IRB 4400/60 Product Manual page 259

Equipment
Elbow fitting
Rubber clamp
T-plug connector
Y-plug connector
Bulkhead plug connector
Air hose
Straight plug connector
Straight fitting
Adapter
xx0600003343
Pneumatic house
A
B
C
D
E
F
Product manual - IRB 4400
3HAC022032-001 Revision: Q
Article number
3HAC026511-001/ 1
3HAC026523-001
3HAC026515-001/ 2
3HAC026514-001/ 3
3HAC026513-001/ 1
3HAC026526-001
3HAC026516-001/ 1
3HAC026507-001/ 4
3HAC027569-001/ 1
Article number
3HAC026526-001
140 mm
270 mm
3050 mm
40 mm
1750 mm
425 mm
© Copyright 2004-2018 ABB. All rights reserved.
4.9.1 Repair routines
Pos 6 in figure above
Pos 3 in figure above
Pos 2 in figure above
Pos 1 in figure above
According to table: Pneumatic
house Length 7500 mm
Pos 4 in figure above
Pos 5 in figure above
Pos 7 in figure above
Note
From the Bulkhead plug in the front plate to the
T-plug connector for the SMB box, se step 1 and
2 in Replacement of air hose on page 260
From the T-plug connector to the stright plug
connector in the SMB box.
From the T-plug connector through the base and
up to the Y-plug connector at the motors of axis
4,5,6, se step 3-5 in Replacement of air hose on
page 260.
From the Y-plug connector at axis 4,5,6 motors
to the straight fitting in the motor cover axis 4,5,6.
From the Y-plug connector at axis 4,5,6 motors
to the the Y-plug connector at for the motors of
axis 3, se step 6 in Replacement of air hose on
page 260.
From the Y-plug connector at axis 3 motors to the
straight fitting in the motor cover axis 3.
Continues on next page
4 Repair
Continued
259