Attaching The Hp E1413 Terminal Module - HP E1313A Manual

Attaching the HP E1413 Terminal Module

1
Extraction Lever
Use a small screwdriver
to pry and release the
two extraction levers
Extraction Lever
3
4
52 Field Wiring
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 2-17 shows how to attach the HP E1413 terminal module.
Extend the extraction levers on the
Terminal Module
Install Mylar Thermal Barrier
on Terminal Module
connectors
Apply gentle pressure to attach
the Terminal Module to the
HP E1413 A/D Module
Push in the extraction levers
to lock the Terminal Module
onto the HP E1413 A/D Module
Figure 2-17. Attaching the HP E1413 Terminal Module
HP E1413
A/D Module
Align the Terminal Module
2
connectors to the HP E1413
module connectors
Extraction
Levers
Chapter 2