HP E1313A Manual page 96

Connect
All Thermistors
on Both Panels
Measuring Using the
Center Thermistor
Figure 3-8. Center Thermistor Measurements on a Single Panel
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Two HP E1586 Terminal Panels
using All Thermistors on Each Panel
Figure 3-7. Connecting Six Thermistors on Two Panels
To measure the center thermistor, select an HP E1413C channel as a
reference channel. Connect the reference channel's HI and LO to the center
thermistor (thermistor 2) HI-T2S and LO-T2S terminals, respectively.
These connections are shown in Figure 3-8.
One HP E1586 Terminal Panel
Measuring One Thermistor
on Reference Channel 100
Using the HP E1313/E1413 95