[Sense:]Strain:gfactor; [Sense:]Strain:gfactor <Gage_Factor>,(@<Ch_List>); [Sense:]Strain:gfactor? (@<Channel>) - HP E1313A Manual

Usage

[SENSe:]STRain:GFACtor

Parameters
Comments
Usage
[SENSe:]STRain:GFACtor?
Parameters
Comments
Usage
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SENS:STRAIN:EXC? (@107)
Enter statement here.
[SENSe:]STRain:GFACtor <
to be used to convert strain bridge readings for the channels specified by
Parameter Parameter
Name Type
< gage_factor > numeric (float32)
ch_list
< > channel list (string)
• <
ch_list must specify the channel used to sense the bridge voltage, not the
>
channel position on a Bridge Completion SCP.
•
Related Commands: [SENSe:]STRain:GFACtor?
commands
•
*RST Condition: Gage factor is 2.
STRAIN:GFAC 3,(@100:107)
[SENSe:]STRain:GFACtor? (@<
for the sense channel specified by
Parameter Parameter
Name Type
channel channel list (string)
< >
• <
channel must specify a single channel only.
>
•
Returned Value: Numeric value of gage factor. The C-SCPI type returned is flt32.
•
Related Commands: [SENSe:]STRain:GFACtor
STRAIN:GFAC? (@107)
Enter statement here.
Query excitation voltage for channel 7.
Returns the excitation voltage set by
STR:EXC.
gage_factor ch_list
>,(@< >)
Range of
Values
1 - 5
100 - 163
, [SENSe:]FUNCtion:STRain:...
Set gage factor for channels 0 through 7.
channel >) returns the gage factor currently set
< channel > .
Range of
Values
100 - 163
Query gage factor for channel 7.
Returns the gage factor set by STR:GFAC.
HP E1313/E1413 Command Reference
[SENSe:]
specifies the gage factor
ch_list .
< >
Default
Units
none
none
Default
Units
none
249