Installing Hp E1413 Signal Conditioning Plug-Ons; And - HP E1313A Manual

Installing HP E1413
Signal Conditioning
Plug-ons
CAUTION
HP E1413 Step 1: Installing SCPs
Remove the cover from the HP E1413
22 Getting Started
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following illustrations show the steps you will use to install the
HP E1413 Signal Conditioning Plug-on modules (SCPs).
Use approved Static Discharge Safe handling procedures anytime you have
the covers removed from the HP Scanning A/D Converter modules or are
handling SCPs.
2
Remove the SCP
Retaining Screws
1
Remove 2 screws (#10 Torx);
lift front and slide out tabs
E1520 REMVLEFT
Chapter 1