Verifying The Hp 8511A - HP 8511A Operating And Service Manual

Verifying the HP 8511A

The HP 8511A has been designed to operate specifically with the HP 8510
network analyzer.
•
To install the instrument, turn to Chapter 3, "Installation" of this
manual.
•
To check the proper operation of the HP 8511A, see "Operators Check"
on page 4-3 of this manual.
•
To verify that the instrument meets its published specifications, use the
HP 8511A,B and Antenna Measurement System Performance
Verification Software (HP part number 08511-60024).
•
To troubleshoot the HP 8511A, begin with the "Service and Equipment
Overview" chapter of the HP 8510 On-Site Service Manual.
HP 8511A Test Set Operating and Service Manual 1-3
General Information
Verifying the HP 8511A