Calibration:tare - HP E1313A Manual

Command
Sequence

CALibration:TARE?

Command
Sequence
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ch_list
CAL:TARE @< >
CAL:TARE?
CAL:STOR TARE
returns a value to indicate the success of the last

CALibration:TARE?

CALibration:TARE operation.
CALibration:TARE operation is complete.
•
Returned Value:
Value
0
-1
-2
The C-SCPI type for this returned value is int16.
•
Executing
CALibration:TARE
Group. Executing CALibration:TARE?
•
Related Commands: CALibration:STORe TARE
DIAGnostic:CALibration:TARE[:OTDetect][:MODE]
CAL:TARE @< ch_list >
CAL:TARE?
CAL:STOR TARE
Correct channel offsets.
Return the success flag from the CAL:TARE
operation.
Optional depending on necessity of long
term storage.
CALibration:TARE? returns the value only after the
Meaning
Cal OK
Cal Error
See Error Messages in Appendix B.
No results available Perform CALibration:TARE
before CALibration:TARE?.
sets the Calibrating bit (bit 0) in Operation Status
resets the bit.
,
Correct channel offsets.
Return the success flag from the CAL:TARE
operation.
Optional depending on necessity of long
term storage.
HP E1313/E1413 Command Reference
CALibration
Further Action
None
Query the Error Queue
(SYSTem:ERRor?)
Also run *TST?.
183