Status:operation[:Event]; Status:operation:ntransition; Status:operation:ntransition <Transition_Mask - HP E1313A Manual

STATus

STATus:OPERation[:EVENt]?

Comments
Usage

STATus:OPERation:NTRansition

Parameters
Comments
256 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

STATus:OPERation[:EVENt]?

the Event Register.
•
When using the Operation Event Register to cause SRQ interrupts,
STAT:OPER:EVENT? must be executed after an SRQ to re-enable future interrupts.
•
Returned Value: Decimal weighted sum of all set bits. The C-SCPI type
returned is uint16.
•
Related Commands:
*STB?
STATus:OPERation:ENABle
•
Cleared By: *CLS , power-on, and by reading the register.
•
*RST Condition: No change.
STAT:OPER:EVENT?
STAT:OPER?
STATus:OPERation:NTRansition <
Transition Filter (NTF) Register. When a bit in the NTF Register is set to one, the
corresponding bit in the Condition Register must change from a one to a zero in
order to set the corresponding bit in the Event Register. When a bit in the NTF
Register is zero, a negative transition of the Condition Register bit will not change
the Event Register bit.
Parameter Parameter
Name Type
< transition_mask > numeric (uint16)
• <
transition_mask > may be sent as decimal, hex (#H), octal (#Q), or binary (#B).
•
If both the Status Operation Positive Transition Filter (
Status Operation Negative Transition Filter (
corresponding bit set to one, any transition, positive or negative will set the
corresponding bit in the Event Register.
•
If neither the Status Operation Positive Transition Filter (
Status Operation Negative Transition Filter (
corresponding bit set to one, transitions from the Condition Register will have no
effect on the Event Register.
returns the decimal weighted value of the bits set in
, ,
SPOLL STATus:OPERation:CONDition?
,
STATus:OPERation:ENABle?
Enter statement will return the value of bits
set in the Operation Event Register.
Same as above.
transition_mask >
Range of
Values
0 - 32767
STAT:OPER:NTR
STAT:OPER:NTR
,
sets bits in the Negative
Default
Units
none
STAT:OPER:PTR ) and
) Registers have a
STAT:OPER:PTR ) or
) Registers have a
Chapter 5