Instrument Drivers; About Example Programs - HP E1313A Manual

Instrument Drivers

About Example Programs

Examples on Disc
Example Command
Sequences
Chapter 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If you will be using the HP E1313/E1413 with C-SCPI, the driver is
supplied as an option to the C-SCPI product. Follow the C-SCPI
documentation for use.
The HP E1300/E1301, HP E1306, and HP E1405B/E1406A, downloadable
driver is supplied with your HP E1313/E1413. See the manual for your
HP command module/mainframe for downloading procedures.
All example programs mentioned by file name in this manual are available
on the HP E1313/E1413 C-SCPI driver media (both DOS and HP-UX
versions). Most of these example programs are also supplied in DOS C
versions for users of HP command modules on the DOS formatted
downloadable driver disc for the command module (HP E1405B or
HP E1406A). An IBASIC version of the Verify program shown below is
supplied on the LIF formatted downloadable command module driver.
Where programming concepts are discussed in this manual, the commands
to send to the HP E1313/E1413 are shown in the form of command
sequences. These are not example programs because they are not written in
any computer language. They are meant to show the HP E1313/E1413
SCPI commands and in which sequence they should be sent. Where
necessary, these sequences include comments to describe program flow and
control such as loop - end loop, and if - end if. See the code sequence on
page 105 for an example.
Getting Started 29