HP E1313A Manual page 330

Appendix B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
+3065 'Scan list used in LISTL list must have at least 6 channels'
+3066 'Autorange not allowed with AVERAGE on'
+3067 'Multiple attempts to erase Flash Memory failed'
+3068 'Multiple attempts to program Flash Memory failed'
+3069 'Programming voltage jumper not set properly'. See
" Disabling Flash Memory Access" in Chapter 1
(JM2201).
+3070 'Identification of Flash ROM incorrect'
+3071 'Checksum error on Flash Memory'
+3072 'Autorange not allowed with SENSE:FILTER on'. This
filter is the A/D filter. Use of SCP filtering (filtering at
channels) allows autoranging at high speed.
+3073 'Scan rate too fast with SENSE:FILTER on'. Minimum
SAMPle:TIMer
Use of SCP filtering (filtering at channels) allows
sampling at maximum speed (
interval is 145 µsec while A/D filter is on.
SAMP:TIM 10us
Error Messages
).
329