Route:sequence:define; Route:sequence:define? <Scan_List>,<Mode - HP E1313A Manual

ROUTe

ROUTe:SEQuence:DEFine?

Parameters
Comments
Usage
224 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ROUTe:SEQuence:DEFine? <
LIST4 , returns either the sequence of channels or the sequence of Channel Data
Modifiers for Scan List LIST<
of scan list numbers.
Parameter Parameter
Name Type
< scan_list > discrete (string)
mode discrete (string)
< >
•
The default for mode
< >
•
When scan_list is
< > LIST1 - LIST4
ROUTe:SEQuence:DEFine?
•
When < scan_list > is LIST1 - LIST4
ROUTe:SEQuence:DEFine?
current Scan List channels. The meaning of the Channel Data Modifier values are
shown in the following table.
Channel Data
Modifier
1 Perform EU conversion and store result in both FIFO buffer and
Current Value Table.
2* Leave measurement as voltage and store result in both FIFO and CVT.
3 Perform EU conversion and store result in CVT only.
4* Leave measurement as voltage and store in CVT only.
5 Perform EU conversion and store result in FIFO only.
6* Leave measurement as voltage and store in FIFO only.
7* Leave measurement as voltage and do not store result in either
FIFO or CVT. Use as dummy channel set.
* Limit Checking (CALCulate:LIMit:...) cannot be performed on channels that are not
converted to Engineering Units.
•
Returned Value: Returned values are as a comma separated list.
•
Related Commands: ROUTe:SEQuence:DEFine
•
*RST Condition: Scan List 1 =
Scan Lists 2 through 4 have no channels assigned to them,
assigned to it.
ROUT:SEQ:DEF? LIST2, CHAN
Enter comma separated list of channels
ROUT:SEQ:DEF? LISTL
Enter comma separated list of Scan Lists
scan_list mode
>[,< >]
n > . When < scan_list >
Range of
Values
LIST1 | LIST2 | LIST3 | LIST4 | LISTL
CHANnel | MODifier
is .
CHAN
and mode is
< > CHAN
returns the sequence of channels assigned to
and < mode > is
returns the Channel Data Modifiers assigned to the
Description
,
(@100:163) (Channel Data Modifiers are all 1),
Query for channel sequence in LIST2.
Query for scan list sequence in LISTL.
When scan_list is
< > LIST1
is LISTL , returns the sequence
Default
Units
none
none
,
< scan_list
MOD,
ROUTe:SCAN
LISTL as no Scan Lists
Chapter 5
-
> .