Status:questionable[:Event]; Status:questionable:ntransition; Status:questionable:ntransition <Transition_Mask - HP E1313A Manual

High speed a/d module
Table of Contents

Advertisement

STATus:QUEStionable[:EVENt]?

Comments
Usage

STATus:QUEStionable:NTRansition

Parameters
Comments
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

STATus:QUEStionable[:EVENt]?

set in the Event Register.
When using the Questionable Event Register to cause SRQ interrupts,
STAT:QUES:EVENT?
must be executed after an SRQ to re-enable future interrupts.
Returned Value: Decimal weighted sum of all set bits. The C-SCPI type
returned is uint16.
Cleared By:
, power-on, and by reading the register.
*CLS
Related Commands:
*STB?
STATus:QUEStionable:ENABle
STAT:QUES:EVENT?
STAT:QUES?
STATus:QUEStionable:NTRansition <
Transition Filter (NTF) Register. When a bit in the NTF Register is set to one, the
corresponding bit in the Condition Register must change from a one to a zero in order to
set the corresponding bit in the Event Register. When a bit in the NTF Register is zero,
a negative transition of the Condition Register bit will not change the Event Register bit.
Parameter
Parameter
Name
Type
<
transition_mask
> numeric (uint16)
• <
transition_mask
>
may be sent as decimal, hex (#H), octal (#Q), or binary (#B).
If both the Status Questionable Positive Transition Filter (
Status Questionable Negative Transition Filter (
a corresponding bit set to one, any transition, positive or negative will set the
corresponding bit in the Event Register.
If neither the Status Questionable Positive Transition Filter (
Status Questionable Negative Transition Filter (
a corresponding bit set to one, transitions from the Condition Register will have
no effect on the Event Register.
Related Commands:
STATus:QUEStionable:NTRansition?
STATus:QUEStionable:PTRansition
Cleared By:
STATus:PRESet
returns the decimal weighted value of the bits
,
,
SPOLL
STATus:QUEStionable:CONDition?
,
STATus:QUEStionable:ENABle?
Enter statement will return the value of bits
set in the Questionable Event Register.
Same as above.
transition_mask
Range of
Values
0 - 32767
STAT:QUES:NTR
STAT:QUES:NTR
and power-on.
HP E1313/E1413 Command Reference
STATus
,
sets bits in the Negative
>
Default
Units
none
STAT:QUES:PTR
) and
) Registers have
) or
STAT:QUES:PTR
) Registers have
,
261

Advertisement

Table of Contents
loading

This manual is also suitable for:

E1413c

Table of Contents