Output:ttltrg:source; Output:ttltrg<N>[:State]; Output:ttltrg<N>[:State] <Ttltrg_Cntrl - HP E1313A Manual

OUTPut

OUTPut:TTLTrg:SOURce?

Comments
Usage
OUTPut:TTLTrg<n>[:STATe]
Parameters
Comments
Usage
OUTPut:TTLTrg<n>[:STATe]?
Comments
Usage
218 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

OUTPut:TTLTrg:SOURce?

•
Returned Value: Discrete, one of;
LIMit . The C-SCPI type returned is string.
•
Related Commands:
OUTPut:TTLTrg:SOURce
OUTP:TTLT:SOUR?
OUTPut:TTLTrg< n >[:STATe] <
line is enabled to source a trigger signal when the module is triggered.
can specify line 0 through 7. For example,
VXIbus TTLTRG line 4.
Parameter Parameter
Name Type
n
< > numeric
ttltrg_cntrl discrete (string)
< >
•
Only one VXIbus TTLTRG line can be enabled simultaneously.
•
This command will cause Error +3000, "illegal while initiated" if trigger is initiated.
•
Related Commands:
ABORt
•
*RST Condition: OUTPut:TTLTrg<0
OUTPut:TTLTrg2:STATe ON
OUTP:TTLT7:STAT ON
n
OUTPut:TTLTrg< >[:STATe]?
•
Returned Value: Returns
•
Related Commands:
OUTPut:TTLTrg<
OUTP:TTLT2?
OUTP:TTLT7:STAT?
returns the current setting for the TTLTRG line source.
TRIGger , FTRigger
Enter statement will return on of FTR, LIM,
SCP, or TRIG.
ttltrg_cntrl > specifies which VXIbus TTLTRG
OUTPut:TTLTRG4
Range of
Values
1 through 7
ON | OFF
, commands,
INITiate:...
through 7> OFF
Enable TTLTRG2 line to source a trigger.
Enable TTLTRG7 line to source a trigger.
returns the current state for TTLTRG line
1 or 0 . The C-SCPI type returned is int16.
n
>[:STATe]
See if TTLTRG2 line is enabled (returns 1
or 0).
See if TTLTRG7 line is enabled.
, SCPlugon , or
TTLTrg< n >
or OUTPut:TTLT4 for
Default
Units
none
none
commands
TRIGger:...
n .
< >
Chapter 5