Trigger:timer:mode - HP E1313A Manual

TRIGger
Trigger Idle
State
INIT:CONT ON
Sets Current\
Scan List Here
Initiated
State
Waiting For
Timer Arm
ARM Event
Reset and
Start Timer
Usage

TRIGger:TIMer:MODE?

Comments
Usage
272 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sets Current
Scan List Here
Waiting For
Timer Trigger
Timer
Execute Scan
and Increment
Trig. Counter
Figure 5-8. Synchronous Mode Sequence
•
Related Commands: INITiate:CONTinuous

TRIGger:TIMer:MODE?

•
*RST Condition:
TRIGger:TIMer:MODE ASYNCHRONOUS
TRIG:TIM:MODE SYNC
TRIGger:TIMer:MODE?
•
Returned Value: Discrete; either
string.
•
Related Commands:
TRIGger:TIMer:MODE
•
*RST Condition:
TRIGger:TIMer:MODE ASYNCHRONOUS
TRIG:TIM:MODE?
Timer
Stopped
INIT:CONT OFF
no
INIT:CONT ON?
yes
yes
Trig Counter=
no TRIG:COUNT?
, TRIGger:COUNt
Change trigger timer mode to synchronous.
returns the currently set mode for the trigger timer.
SYNCH or ASYN
Query returns either SYNC or ASYN.
Both paths inside this box are
assured of evenly timed
scans. This allows changing
the Scan Lists for instance
and the new list will start
executing synchronously
with the old list.
,
. The C-SCPI type returned is
Chapter 5