Lmc; Opc - HP E1313A Manual

Common Command Reference
Note

*LMC?

*OPC

Note

*OPC?

278 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
returns the following response strings depending on model and options:
*IDN?
HEWLETT-PACKARD,E1413C
HEWLETT_PACKARD,E1313A_32CH
HEWLETT_PACKARD,E1313A_64CH
•
The C-SCPI type for this returned value is string.
The revision will vary with the revision of the driver software installed in your
system. This is the only indication of which version of the driver is installed.
Learn Macros Query. Returns a quoted string name for each currently defined
macro. If more than one macro is defined, the strings are separated by commas (,).
If no macro is defined,

*LMC?

Operation Complete. Causes an instrument to set bit 0 (Operation Complete
Message) in the Standard Event Status Register when all pending operations have
been completed. By enabling this bit to be reflected in the Status Byte Register
( command), you can ensure synchronization between the instrument and an
*ESE 1
external computer or between multiple instruments.
Do not use

*OPC

to determine when the
commands have completed. Instead, use their query forms
CALibration:TARE? .
Operation Complete Query. Causes an instrument to place a 1 into the
instrument's output queue when all pending instrument operations are finished. By
requiring your computer to read this response before continuing program execution,
you can ensure synchronization between one or more instruments and the computer.
The C-SCPI type for this returned value is int16.
,<serial number>,<revision number>
,<serial number>,<revision number>
,<serial number>,<revision number>
returns a null string.
CALibration:SETup or CALibration:TARE
CALibration:SETup? or
Chapter 5