Calculate:limit:upper:data; Calculate:limit:upper[:State]; Calculate:limit:upper:data? (@<Channel>); Calculate:limit:upper[:State] <Enable>,(@<Ch_List>) - HP E1313A Manual

CALCulate:LIMit:UPPer:DATA?

Parameters
Comments
Usage

CALCulate:LIMit:UPPer[:STATe]

Parameters
Comments
Usage
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CALCulate:LIMit:UPPer:DATA? (@<
currently set for the channel specified by
Parameter Parameter
Name Type
< channel > channel list (string)
• <
channel > must specify a single channel.
•
Returned Value: Numeric. The C-SCPI type returned is float32.
•
Related Commands:
CALCulate:LIMit:UPPer:DATA
CALC:LIM:UPP:DATA? (@107)
CALCulate:LIMit:UPPer[:STATe] <
testing of upper limits for channels specified in
Parameter Parameter
Name Type
< enable > discrete (string)
ch_list
< > channel list (string)
•
If
CALCulate:LIMit:UPPer[:STATe]
exceeded status. If
CALCulate:LIMit:UPPer[:STATe]
limit exceeded status regardless of the setting of
•
Related Commands: CALCulate:LIMit[:STATe
•
*RST Condition: CALCulate:LIMit:UPPer:STATe OFF
CALC:LIM:UPP ON
channel returns the upper limit value
>)
< channel > .
Range of
Values
100 - 163
Returns the upper limit set for channel 7.
enable ch_list
>,(@<
ch_list
< >
Range of
Values
ON | OFF
100 - 163
is , an overrange will not cause a limit
OFF
is
ON
CALCulate:LIMit:UPPer:DATA
], CALCulate:LIMit:LOWer[:STATe]
Enables upper limit checking.
HP E1313/E1413 Command Reference
CALCulate
Default
Units
none
enables or disables
>)
.
Default
Units
none
none
, an overrange will cause a
.
173