Diagnostic:custom:piecewise; Diagnostic:custom:piecewise <Table_Range>,<Table_Block>,(@<Ch_List>) - HP E1313A Manual

DIAGnostic:CUSTom:PIECewise

Parameters
Comments
Usage
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIAGnostic:CUSTom:PIECewise <
downloads a custom piecewise Engineering Unit Conversion table (in
to the HP E1313/E1413. Contact your Hewlett-Packard System Engineer for more
information on Custom Engineering Unit Conversion for your application.
Parameter Parameter
Name Type
< table_range > numeric (float32)
< table_block > definite length block
data
< ch_list > channel list (string)
• <
table_block is a block of 1,024 bytes that define 512, 16-bit values. SCPI
>
requires that table_block
<
adds the header for you.
• <
table_range > specifies the range of voltage that the table covers
(from – < table_range >
• <
ch_list > specifies which channels may use this custom EU table.
•
Related Commands:
[SENSe:]FUNCtion:CUSTom
•
*RST Condition: All custom EU tables erased.
Program puts table constants into array table_block.
table_block
DIAG:CUST:PIEC
SENS:FUNC:CUST:PIEC 1,1,(@124:131) Link custom EU with channels 24 - 31.
INITiate then TRIGger module.
table_range
>,<
Range of
.015625 | .03125 | .0625 | .125 | .25 | .5 |
1 | 2 | 4 | 8 | 16 | 32 | 64
See Comments below.
100 - 163
include the definite length block data header. C-SCPI
>
to + < table_range > ).
,(@124:131) Send table for channels 24 - 31 to
HP E1413.
HP E1313/E1413 Command Reference
DIAGnostic
table_block ch_list
>,(@< >)
< table_block
Default
Values Units
volts
none
none
> )
191