Input:low; Input:low <Wvolt_Type>,(@<Ch_List>); Input:low? (@<Channel>) - HP E1313A Manual

INPut
Usage

INPut:LOW

Parameters
Comments
Usage
INPut:LOW?
Parameters
Comments
Usage
208 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
Related Commands:
INPut:GAIN
•
*RST Condition: Gain set to
INP:GAIN? (@105)
INP:GAIN? (@100)
wvolt_type
INPut:LOW < >,(@<
Strain Bridge SCP channel specified by <ch_list>. LO can be connected to the
Wagner Voltage ground or left floating.
Parameter Parameter
Name Type
< wvolt_type > discrete (string)
ch_list channel list (string)
< >
•
Related Commands:
INPut:LOW?
•
*RST Condition:
INPut:LOW FLOat
INPut:LOW WVOL,(@100:103,116:119)
INPut:LOW? (@< channel
specified by < channel > .
Parameter Parameter
Name Type
channel
< > channel list (string)
• <
channel must specify a single channel only.
>
•
Returned Value: Returns
•
Related Commands: INPut:LOW
INP:LOW? (@103)
.
1
Check gain on channel 5.
Check gain on channel 0.
ch_list controls the connection of input LO at a
>)
Range of
Values
FLOat | WVOLtage
100 - 163
(all HP E1511 Transient Strain SCP channels)
Connect LO of channels 0 through 3 and 16
through 19 to Wagner Ground.
>) returns the LO input configuration for the channel
Range of
Values
100 - 163
FLO or WV . The C-SCPI type returned is string.
Enter statement will return either FLO or
WV for channel 3.
Default
Units
none
none
Default
Units
none
Chapter 5