Cvt Commands; Newn; Newl; Scpchar - HP E1313A Manual

15 14 - 6
SCP Not
Present Assigned

CVT Commands

372 Register-Based Programming
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NEW n
Initializes scan list n to null. Any previous scan items assigned to this list
are lost.

NEWL

Initializes " List-of-Lists" to null. Any previous Scan Lists assigned to this
list are lost.
scp_number
SCPCHAR <
Sends an SCP attributes word to the Control Processor describing the
characteristics of the SCP at installed at
attributes word is as follows:
5 4
Gain is 1 SCP can SCP can
±2ppm
output sense
signals voltage

SCPGAINS

Causes the Control Processor to access SCP registers to determine the
channel gain settings for each
settings are used to relate A/D output to input voltage for EU conversions
and voltage readings. Execute
channel to EU conversion linkage with the

CVTINIT

This command causes the entire Current Value Table to be loaded with
IEEE-754 Not-A-Number (7FFF FFFF hex).
attributes
> < >
scp_number
<
3 2
SCP has
programmable programmable
current cutoff frequency
ASSIGN ed channel. The channel gain
SCPGAINS command after establishing
ASSIGN
0100 - 0103
16
0104
0830
. The format of the
>
1 0
SCP has SCP has
programmable
gain
0820
command.
0420
Appendix D
16
16
16
16
16