Calculate:limit:lower[:State]; Calculate:limit[:State]; Calculate:limit:lower[:State]? (@<Channel>); Calculate:limit[:State] <Enable>,(@<Ch_List>) - HP E1313A Manual

CALCulate:LIMit:LOWer[:STATe]?

Parameters
Comments
Usage

CALCulate:LIMit[:STATe]

Parameters
Comments
Usage
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CALCulate:LIMit:LOWer[:STATe]? (@<
testing for the channel specified by
Parameter Parameter
Name Type
< channel > channel list (string)
• <
channel > must specify a single channel.
•
Returned Value: Numeric
•
Related Commands:
CALCulate:LIMit:LOWer[:STATe]
CALC:LIM:LOW:STAT? (@104)
CALCulate:LIMit[:STATe] <
for the channels specified in
Parameter Parameter
Name Type
< enable > discrete (string)
ch_list channel list (string)
< >
•
Related Commands:
CALCulate:LIMit[:STATe]?
•
*RST Condition:
CALCulate:LIMit:STATe OFF
CALC:LIM ON,(@100:107)
channel returns the state of lower limit
>)
< channel > .
Range of
Values
100 - 163
0 or 1 . The C-SCPI type returned is int16.
Returns state of lower limit testing for
channel 4.
enable >,(@< ch_list >) enables or disables limit testing
< ch_list > .
Range of
Values
ON | OFF
100 - 163
Turn on limit testing for channels 0 through 7.
HP E1313/E1413 Command Reference
CALCulate
Default
Units
none
Default
Units
none
none
171