Scpi Command Reference - HP E1313A Manual

C-SCPI Data Types

SCPI Command Reference

158 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following table shows the allowable type and sizes of the C-SCPI parameter
data sent to the module and query data returned by the module. The parameter and
returned value type is necessary for programming and is documented in each
command in this chapter.
Data Types
int16
int32
uint16
uint32
float32
float64
string
The following section describes the SCPI commands for the HP E1313/E1413.
Commands are listed alphabetically by subsystem and also within each subsystem.
A command guide is printed in the top margin of each page. The guide indicates the
current subsystem on that page.
Table 5-1. C-SCPI Data Types
Description
Signed 16-bit integer number.
Signed 32-bit integer number.
Unsigned 16-bit integer number.
Unsigned 32-bit integer number.
32-bit floating point number.
64-bit floating point number.
String of characters (null terminated).
Chapter 5