Calculate:climits:fail[:Cumulative]; Calculate:climits:fail:current - HP E1313A Manual

CALCulate

CALCulate:CLIMits:FAIL[:CUMulative]?

Comments
Usage

CALCulate:CLIMits:FAIL:CURRent?

Comments
Usage
166 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

CALCulate:CLIMits:FAIL[:CUMulative]?

all channels measured since the module was
•
If any channel has exceeded its limit test since the module was
returned value will be 1
value will be 0 .
•
This condition is also reported to bit 11 of the Operation Status Group and can
generate a VXIbus interrupt.
•
Returned Value: Numeric
•
Related Commands:
CALCulate:CLIMits:FLIMits[:CHANnels][:CUMulative]?
CALCulate:CLIMits:FLIMits:POINts:CURRent?
CALC:CLIM:FAIL:CUM?

CALCulate:CLIMits:FAIL:CURRent?

channels measured in the last completed scan (
•
If any channel in the last completed scan has exceeded its limit test, the returned
value will be 1 . If no channel in the last completed scan has exceeded its limit
test, the returned value will be
•
This condition is also reported to bit 11 of the Operation Status Group and can
generate a VXIbus interrupt.
•
Returned Value: Numeric
•
Related Commands:
CALCulate:CLIMits:FLIMits:...?
commands
CALCulate:LIMit:...
CALC:CLIM:FAIL:CURR?
returns the composite limit test status for
INITiated
. If no channel has exceeded its limit test, the returned
0 or 1 . The C-SCPI type returned is int16.
,
CALCulate:LIMit:...
A subsequent enter statement will return 0 for
no limit failures, or 1 for one or more limit
failures.
returns the composite limit test status for all
CURRent
0 .
0 or 1 . The C-SCPI type returned is int16.
A subsequent enter statement will return 0 for
no limit failures, or 1 for one or more limit
failures.
( CUMulative ).
INITiated , the
,
commands
).
commands,
Chapter 5