HP E1313A Manual page 199

FETCh?
Use Sequence
Note
198 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MEM:VME:ADDR #H300000
MEM:VME:SIZE #H100000
MEM:VME:STAT ON
l
(set up HP E1413 for scanning)
l
l
TRIG:SOUR IMM
INIT:IMM
FORM REAL,64
FETC?
When using the MEMory subsystem, the module must be triggered before executing
the command (as shown above) unless you are using an external
INITiate:IMMediate
trigger ( EXTernal trigger). When using
any time.
1M byte or 262144 readings.
Let unit trigger on INIT.
Program execution remains here until VME
memory is full or the HP E1413 has stopped
taking readings.
Affects only the return of data.
EXTernal trigger, the trigger can occur at
Chapter 5