Trigger - HP E1313A Manual

TRIGger

ARM:SOURce <source>
BUS
External
HOLD
IMMediate
TTLTrg<n>
SCP Trig
Note
266 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The TRIGger command subsystem controls the behavior of the trigger system once
it is initiated (see
INITiate
Figure 5-5 shows the overall Trigger System model. The shaded area shows the
ARM subsystem portion.
TRIGger:TIMer <interval>
Trigger
Timer
Figure 5-5. Logical Trigger Model
The system only exists while
ARM
Mode is set (
TRIGger:SOURce IMMediate
neither of the above conditions are true, SCPI compatibility requires that
be set to IMMediate or Error -221, "Settings conflict" will be generated.
command subsystem).
TRIGger:SOURce <source>
TIMer
TRIGger:SOURce
and
INITiate:CONTinuous ON
TRIGger
Only while
INIT:CONT is ON
&
TRIG:SOUR is IMM
Internal
Trigger Signal
Trigger
Enable
Trigger
Counter
TRIGger:COUNt <count>
is or while the Continuous
TIMer
). When
ARM:SOURce
Chapter 5