Table of Contents
Advertisement
Usage
STATus:OPERation:NTRansition?
Comments
Usage
STATus:OPERation:PTRansition
Parameters
Comments
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
•
Related Commands:
STATus:OPERation:NTRansition?
STATus:OPERation:PTRansition
•
Cleared By:
STATus:PRESet
•
*RST Condition: No change.
STAT:OPER:NTR 16
STATus:OPERation:NTRansition?
Transition Filter (NTF) Register.
•
Returned Value: Decimal weighted sum of all set bits. The C-SCPI type
returned is uint16.
•
Related Commands:
STATus:OPERation:NTRansition
•
*RST Condition: No change.
STAT:OPER:NTR?
STATus:OPERation:PTRansition <
Transition Filter (PTF) Register. When a bit in the PTF Register is set to one, the
corresponding bit in the Condition Register must change from a zero to a one in
order to set the corresponding bit in the Event Register. When a bit in the PTF
Register is zero, a positive transition of the Condition Register bit will not change
the Event Register bit.
Parameter
Parameter
Name
Type
transition_mask
<
> numeric (uint16)
• <
transition_mask
may be sent as decimal, hex (#H), octal (#Q), or binary (#B).
>
•
If both the Status Operation Positive Transition Filter (
Status Operation Negative Transition Filter (
corresponding bit set to one, any transition, positive or negative will set the
corresponding bit in the Event Register.
•
If neither the Status Operation Positive Transition Filter (
Status Operation Negative Transition Filter (
and power-on.
When "Measuring" bit goes false, set bit 4
in Status Operation Event Register.
returns the value of bits set in the Negative
Enter statement returns current value of bits
set in the NTF register.
transition_mask
>
Range of
Values
0 - 32767
STAT:OPER:NTR
STAT:OPER:NTR
HP E1313/E1413 Command Reference
STATus
,
sets bits in the Positive
Default
Units
none
) and
STAT:OPER:PTR
) Registers have a
STAT:OPER:PTR
) or
) Registers have a
257
Advertisement
Chapters
Table of Contents
