MEMory
MEMory:VME:STATe
Parameters
Comments
Usage
MEMory:VME:STATe?
Comments
Usage
212
HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
enable
MEMory:VME:STATe <
as additional reading storage.
Parameter
Parameter
Name
Type
<
enable
>
boolean
•
This command is only available in systems using an HP E1405B or HP E1406A
Command Module.
•
When the VME memory card is enabled, the
not terminate until data acquisition stops or VME memory is full.
•
Related Commands:
MEMory...
•
*RST Condition:
MEMory:VME:STATe OFF
MEM:VME:STAT ON
MEM:VME:STAT 0
returned value of
MEMory:VME:STATe?
disabled. Returned value of
•
This command is only available in systems using an HP E1405B or HP E1406A
Command Module.
•
Returned Value: Numeric value either
•
Related Commands:
MEMory...
MEM:VME:STAT?
enables or disables use of the VME memory card
>
Range of
Values
1 | 0 | ON | OFF
INITiate:IMMediate
commands and
FETCh?
Enable VME card as reading storage.
Disable VME card as reading storage.
0
indicates that VME reading storage is
1
indicates VME memory is enabled.
1
or
0
.
commands and
FETCh?
Returns 1 for enabled, 0 for disabled.
Default
Units
none
command does
Chapter 5