DIAGnostic:CHECksum?
Comments
Usage
DIAGnostic:COMMand:SCPWRITE
Parameters
Comments
Usage
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DIAGnostic:CHECksum?
returned value of
1
indicates that Flash memory contents are correct. A returned
value of
0
indicates that the Flash Memory is corrupted, or has been erased.
•
Returned Value: Returns
DIAG:CHEC?
DIAGnostic:COMMand:SCPWRITE <
custom Signal Conditioning Plug-on registers. Use to control custom SCPs created
using the HP E1504 Breadboard SCP.
Parameter
Parameter
Name
Type
<
reg_addr
>
numeric (int32)
reg_data
numeric (int32)
<
>
•
See the Register Programming Section of your SCP Manual for parameter values.
•
Related Commands:
DIAGnostic:QUERy:SCPREAD?
DIAG:COMM:SCPWRITE 696,3
performs a checksum operation on Flash Memory. A
1
or
0
. The C-SCPI type returned is int16.
Checksum Flash Memory, return 1 for OK,
0 for corrupted.
reg_addr
reg_data
>,<
Range of
Values
0 - 65,535
0 - 65,535
For HP E1505 Current Source, set channel 7
on SCP 2 to 488 mA with output enabled.
HP E1313/E1413 Command Reference
DIAGnostic
writes data to
>
Default
Units
none
none
189