HP E1313A Manual page 289

Command Quick Reference
Command
[:EVENt]?
:NTRansition <transition_mask>
:NTRansition?
:PTRansition <transition_mask>
:PTRansition?
SYSTem
:CTYPe? (@<channel>)
:ERRor?
:VERSion?
TRIGger
:COUNt <trig_count>
:COUNt?
[:IMMediate]
:SOURce BUS | EXT | HOLD | IMM | SCP | TIMer | TTLTrg<n>
:SOURce?
:TIMer
:MODE ASYNchronous | SYNChronous
:MODE?
[:PERiod] <trig_interval>
[:PERiod]?
288 HP E1313/E1413 Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SCPI Command Quick Reference
Returns weighted sum of bits that represent Questionable Data events.
Sets mask bits in the Negative Transition Filter (NTF) Register.
Returns value of bits set in the NTF Register.
Sets mask bits in the Positive Transition Filter (PTF) Register.
Returns value of bits set in the PTF Register.
Returns the identification of the SCP at channel.
Returns one element of the error queue " 0" if no errors.
Returns the version of SCPI this instrument complies with.
Specify the number of trigger events that will be accepted.
Returns the current trigger count setting.
Triggers instrument when TRIGger:SOURce is TIMer or HOLD (same
as *TRG and IEEE 488.1 GET commands.
Specify the source of instrument triggers.
Returns the current trigger source.
Sets the interval between scan triggers when TRIGger:SOURce is TIMer
ASYN; Trigger Timer runs only while module is INITiated,
SYNC; Trigger Timer runs continuously.
Returns setting of Trigger Timer Mode.
Sets the interval between scan triggers when TRIGger:SOURce is
TIMer.
Returns setting of trigger timer.
Description
Chapter 5