Fifo Reading Count Register Base + 2A 16; Software Trigger/Arm Register Base + 26; Trigger Timer Register Base + 2C 16 - HP E1313A Manual

FIFO Reading Count Register
Trigger System Registers
Software Trigger/ARM Register
Trigger Timer Register
Appendix D
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Read only: The FIFO Reading Count Register contains the number of
32-bit readings in the FIFO.
Address
Base + 2A Number of readings in FIFO
16
Write only: A write to this register triggers a measurement scan if the
trigger system is enabled and software trigger is selected as a trigger source.
If the above is true and bit 9 of the Trigger Mode Register is set, a write to
this register arms (starts) the trigger timer.
Address
Base + 26
16
Read/Write: A write to this register sets the time interval between timer
triggers. The resolution is 1.0E-4 seconds. The minimum interval is 1.0E-4
seconds. The trigger interval in seconds = (1.0E−4∗reg_value)+1.0E−4
Address
Base + 2C trigger interval (0 - 65535)
16
15 - 0
15 - 0
write any data
15 - 0
Register-Based Programming
Base + 2A
16
Base + 26
16
Base + 2C
16
353