Chapter 3. Hp E1418A Scpi Command Reference; Using This Chapter; Command Types; Common Command Format - HP E1418A User Manual

8/16-channel d/a converter module
Hide thumbs Also See for E1418A:
Table of Contents

Advertisement

HP E1418A SCPI Command Reference

Using This Chapter

Command Types

Common
Command
Format
Chapter 3
This chapter describes Standard Commands for Programmable Instrumentation
(SCPI) and summarizes IEEE 488.2 Common (*) Commands applicable to the
HP E1418A D/A Converter Module. This chapter contains the following sections:
• Command Types . . . . . . . . . . . . . . . . . . . . . . . . . Page 58
• SCPI Command Reference . . . . . . . . . . . . . . . . . . . . Page 61
• ABORt Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 62
• APPLy Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 63
• CALibration Subsystem . . . . . . . . . . . . . . . . . . . . . . Page 65
• DIAGnostic Subsystem . . . . . . . . . . . . . . . . . . . . . . Page 75
• INITiate Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 79
• OUTPut Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 80
• SOURce Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 83
• STATus Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 94
• SYSTem Subsystem . . . . . . . . . . . . . . . . . . . . . . . Page 99
• TEST Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . Page 100
• TRIGger Subsystem . . . . . . . . . . . . . . . . . . . . . . . . Page 103
• IEEE 488.2 Common Command Quick Reference . . . . . . . . Page 106
• HP E1418A Command Quick Reference . . . . . . . . . . . . . Page 107
Commands are separated into two types: IEEE 488.2 Common Commands and
SCPI Commands.
The IEEE 488.2 standard defines the common commands that perform functions
like reset, self-test, status byte query, etc. Common commands are four or five
characters in length, always begin with the asterisk character (*), and may include
one or more parameters. The command keyword is separated from the first
parameter by a space character. Common commands are not documented, except in
a general manner, in this manual. Some examples of common commands are:
*RST
*ESR 32
*STB?
HP E1418A SCPI Command Reference
Chapter 3
58

Advertisement

Table of Contents
loading

Table of Contents